A dive into the past. This is the feeling that this collection instill. Dedicated to the lovers of tradition and of classic, timeless colours, which will bring you in an ocean of memories and genuine emotions.
CHIANTI NEW 2017
TABACCO NEW 2017
At each supply of our products we issue a certificate that declare the production made in Italy.
Full compliance with requirements of Class E1
Flame Retardant Certification
Class 1 flame retardant varnishing available on request
Full compliance with CE marking requirements
Manufactured entirely in Italy
Installation on marble/ceramic/cement or similar subfloor, and multilayer panels or chipboards.
Adhesive for the laying process
Adhesive bi-component (A (9KG) + B (1KG) or mono-component (water free) covering the whole laying surface.
Room temperature during the installation process
Near the parquet wood flooring, it’s advisable to keep the air’s Relative Humidity at 50-60% and the temperature to not be less than 16°C.
Humidity levels of the flooring
The R.H of the base must not exceed 2% in weight. In cases of hydronic radiant flooring, it must not exceed 1,7% in weight and the refrigerant circuit must be turned on 15 days before installation of the wood.
Clean the eventual remainder of adhesive off the floor, with a special vacuum cleaner designed for pre-finished flooring, covering the whole surface.
For everyday cleaning use an electrostatic dust mop.
For better maintenance of the wood floor use a well wrung out damp cloth.