PARQUET WOOD BLOCK FLOORING
At each supply of our products we issue a certificate that declare the production made in Italy.
Full compliance with requirements of Class E1
Flame Retardant Certification
Class 1 flame retardant varnishing available on request
Full compliance with CE marking requirements
Manufactured entirely in Italy
Installation on marble/ceramic/cement or similar subfloor, and multilayer panels or chipboards.
Adhesive for the laying process
Adhesive bi-component (A (9KG) + B (1KG) or mono-component (water free) covering the whole laying surface.
Room temperature during the installation process
Near the parquet wood flooring, it’s advisable to keep the air’s Relative Humidity at 50-60% and the temperature to not be less than 16°C.
Humidity levels of the flooring
The R.H of the base must not exceed 2% in weight. In cases of hydronic radiant flooring, it must not exceed 1,7% in weight and the refrigerant circuit must be turned on 15 days before installation of the wood.
Clean the eventual remainder of adhesive off the floor, with a special vacuum cleaner designed for pre-finished flooring, covering the whole surface.
For everyday cleaning use an electrostatic dust mop.
For better maintenance of the wood floor use a well wrung out damp cloth.