Slide background

SPINE COLLECTION

Slide background

SPINE COLLECTION

SPINA/HERRINGBONE 90°
BISTROT

Slide background

SPINE COLLECTION

SPINA/CHEVRON 45°
SPIRIT - VALLE

Slide background

SPINE COLLECTION

SPINA/HERRINGBONE 90°
LIFE - CAFFÈ

formati-tavola-250-300
CHEVRON 45°
Width 90 mm
Length 590 mm
Thickness 11 mm
formati-tavola-250-300-strati

4 mm Top layer
6 mm Birch multi-layer
formati-tavola-250-300
CHEVRON 45°
Width 140 mm
Length 550 / 650 mm
Thickness 14 mm
formati-tavola-250-300-strati

4 mm Top layer
10 mm Birch multi-layer
formati-tavola-250-300
HERRINGBONE 90°
Width 90 mm
Length 700 mm
Thickness 11 mm
formati-tavola-250-300-strati

4 mm Top layer
6 mm Birch multi-layer
formati-tavola-250-300
HERRINGBONE 90°
Width 140 mm
Length 700 / 800 mm
Thickness 14 mm
formati-tavola-250-300-strati

4 mm Top layer
10 mm Birch multi-layer
  • CERTIFICATIONS

    At each supply of our products we issue a certificate that declare the production made in Italy.
    (See document)
    certificazioni

    Formaldehyde
    Full compliance with requirements of Class E1
    Flame Retardant Certification
    Class 1 flame retardant varnishing available on request
    CE Marking
    Full compliance with CE marking requirements
    Manufactured entirely in Italy

  • INSTALLATION INSTRUCTIONS

    Installation instructions
    Installation on marble/ceramic/cement or similar subfloor, and multilayer panels or chipboards.
    Adhesive for the laying process
    Adhesive bi-component (A (9KG) + B (1KG) or mono-component (water free) covering the whole laying surface.
    Room temperature during the installation process
    Near the parquet wood flooring, it’s advisable to keep the air’s Relative Humidity at 50-60% and the temperature to not be less than 16°C.
    Humidity levels of the flooring
    The R.H of the base must not exceed 2% in weight. In cases of hydronic radiant flooring, it must not exceed 1,7% in weight and the refrigerant circuit must be turned on 15 days before installation of the wood.
    Post–installation instructions
    Clean the eventual remainder of adhesive off the floor, with a special vacuum cleaner designed for pre-finished flooring, covering the whole surface.

  • MAINTENANCE

    Cleaning instructions
    For everyday cleaning use an electrostatic dust mop.
    For better maintenance of the wood floor use a well wrung out damp cloth.

  • TECHNICAL SHEET